We sometimes see a corner of the wall is not precise or elbow so little disturbing beauty of a building. Flat surface and the corners of the walls are precision made neat and beautiful walls. Design curved wall design is an important to think about the design. It takes precision and patience artisan to produce a neat wall elements. Working odd jobs or carelessly make wall disheveled, wavy or straight. Such will be clearly visible on the corner of two walls meeting.
Design curved wall design, to avoid or minimize such things can happen, then there are a few tricks that you can apply in your house work. The materials need to be prepared is a small brush made of plywood, multiplex 6mm, nails, buckets and sand for plaster cement paste. Determine the angle of the wall that will bring together the two sides of stucco wall by pulling the thread from top to bottom.
Design curved wall design, order for maximum results and stucco completely dry, let plywood molds for 1 day. Once dry, remove mold plywood on the other side. This is so that the corner of the wall plastering can be met with the sweet. Use plywood on a straight section without cuts, so that the mold be neat. To improve the existing wall, you can instantly smoothed by the Koran. If the surface is too perforated angle and not straight, it's good to be remade from scratch. We recommend using 6mm plywood up. The thicker, the better. Thick plywood board has the form of a straight line end and not easily damaged when nailed and reopened.